Микросхема STM32F100RCT6

Характеристики

STM32F100RCT6The STM32F100RCT6 is a high density access line STM32 F1 series 32-bit Microcontroller incorporates the high-performance ARM Cortex-M3 RISC core operating at a 24MHz frequency, high speed embedded memories (Flash memory up to 256kB and SRAM up to 24KB) and an extensive range of enhanced peripherals and I/Os connected to two APB buses. This device offer one 12-bit ADCs, two 12-bit DACs, up to nine general purpose 16-bit timers and an advanced-control PWM timer, as well as standard communication interfaces — up to two I²Cs, three SPIs, one HDMI CEC, three USARTs and two UARTs.

• 24MHz Maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance
• Single cycle multiplication and hardware division
• Flexible static memory controller with 4 chip selects, supports SRAM, PSRAM and NOR memories
• LCD parallel interface, 8080/6800 modes
• Clock, reset and supply management
• POR, PDR and programmable voltage detector (PVD)
• 4 to 24MHz Crystal oscillator
• Internal 8MHz factory trimmed RC
• Internal 40kHz RC
• PLL for CPU clock
• 32kHz Oscillator for RTC with calibration
• Sleep, stop and standby modes
• VBAT supply for RTC and backup registers
• Serial wire debug (SWD) and JTAG interfaces
• 12-channel DMA Controller
• Two watchdog timers (Independent and window)
• SysTick Timer
• 96-bit Unique ID

Микросхемы / Микроконтроллеры / Микроконтроллеры STM — 32-битные
Корпус: 64-LQFP, инфо: 32бит ARM Cortex M3, 24МГц, 256кб Flash, 24кб ОЗУ, 2xSPI, 2xI2C, 3xUSART, CEC, 7 таймеров, АЦП 12 бит * 16 каналов, 2xЦАП 51 GPIO